Garmin G2000 - Page 275

190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
261
Flight ManageMent
SYSteM
OVeRVieW
Flight
inStRUMentS
eiS
aUDiO Panel
& CnS
Flight
ManageMent
haZaRD
aVOiDanCe
aFCS
aDDitiOnal
FeatUReS
aPPenDiCeS inDeX
APPROACH (APPR)
An Approach Procedure (APPR) can be loaded at any airport that has an approach available. Only one
approach can be loaded at a time in a flight plan. The route for a selected approach is defined by designating
transition waypoints.
Figure 5-110 Approach Selection Screen
Transition Button
Minimums Button
Airport Button
Load & Activate Button
Approach Button
Approach Waypoint Sequence
Remove Button
Load Button
Preview Button
SBAS Channel Button
Figure 5-111 Approach Pane - Preview of the Selected Approach
Destination Runway
Preview of
Selected Arrival
Loading an approach procedure into a stored flight plan:
1) From Home, touch Flight Plan > Flight Plan Options
2) Touch the Catalog Button to display the Flight Plan Catalog Screen.
3) Touch a flight plan selection button to display the Catalog Options Window.
4) Touch the Edit Button to display the Edit Stored Flight Plan Screen.
5) Touch the Flight Plan Options Button to display the Flight Plan Options Window.
6) Touch the Load Approach Button to display the Approach Selection Screen.
This manual downloaded from http://www.manualowl.com