GE MAC 5 A4 User Manual

Configure Settings
Field Action Description
Server Port
Number
Enter a valid
LDAP service port
number.
This field is enabled if the LDAP option is enabled.
No default value.
Allowed values: 1 to 65535
Use CA
Certificate
Enable or disable
this option.
This field displays only if an ldaps URL is configured.
If this option is enabled, a CA certificate is required to
authenticate and connect to the LDAP server. Install
a CA certificate. See Install LDAP SSL CA Certificate on
page 225.
If this option is disabled, a CA certificate is not required
to connect to the LDAP server. The data is encrypted
regardless of whether a CA certificate is installed.
NOTE:
GE Healthcare recommends that you use a CA
certificate when you connect to the LDAP server. If
you do not use a CA certificate, the device runs the
risk of connecting to an unauthorized LDAP server,
potentially enabling an attacker to gain full access
to the device and any data that is stored on it.
Default value: Disabled
Use TLS
Encryption
Enable or disable
this option.
This field displays only if an ldap URL is configured.
If this option is enabled, the connection to the
configured LDAP server is encrypted.
If this option is disabled, the connection to the
configured LDAP server is not encrypted.
Default value: Disabled
Default
Domain Name
Enter a valid
domain name.
This field is enabled if the LDAP option is enabled.
This domain name is used if the LDAP user does not
enter a domain name to login. If a local user with the
same user name exists, then an LDAP user must enter
the domain name and user name in the User Name
field of the Login screen.
No default value.
Allowed values:
• A to Z
• a to z
• 0 to 9
• All special characters
5. Select Test Connection to test the connection to the LDAP server.
• If the connection is successful, a success message displays.
220  MAC
™
5 A4/MAC
™
5 A5/MAC
™
5 Lite 5864335-001-1

GE MAC 5 A4 Specifications

General

Brand	GE
Model	MAC 5 A4
Category	Measuring Instruments
Language	English