4-50 F650 Digital Bay Controller GE Multilin
4.2 HUMAN MACHINE INTERFACE (HMI) 4 HUMAN INTERFACES
4
4.2.5.8 COMMANDS
Commands are configured using EnerVista 650 Setup, and they can be executed using the pushbuttons on the relay front.
Using EnerVista 650 Setup software, the user can configure up to 24 commands with a descriptive text. When executing
the operation from the relay front, the operation description text will be displayed.
Example of commands (operations) executions via HMI
Press the shuttle key in the menu commands when it is selected in the display ().
All the previously configured commands will be displayed. Rotate the shuttle key
move through the available commands. Press ESC to return to previous level.
Press shuttle key to pre-select the operation to be executed
When the message “Push Intro for Confirmation” appears, press the shuttle key to
confirm the commands that will be performed.
Once the commands has been performed or the time out has expired the
“Command completed” message will appear in the display.
Figure 4–23: COMMANDS IN HMI
C h a n g e S e ttin g s
D a te & T im e
* Commands
P a s s w o r d
L–R
ENTER
ESC
Command:
OPEN BREAKER
Command:
CLOSE BREAKER
ENTER
ESC
P u s h ‘In tr o ” f o r
Confirm ation
ENTER
ESC
Com m and
Com pleted
To Next Page
Loading...
Need help?
General
