GE Multilin F650

5-20 F650 Digital Bay Controller GE Multilin
5.3 SYSTEM SETUP 5 SETPOINTS
5
Figure 5–2: FLEXCURVES EDITION
5.3.3 BREAKER
There are two types of breaker setpoints:
Breaker setpoints:
These setpoints correspond to the switchgear configured as breaker in the F650; this switchgear is
used in the recloser functions, breaker failure and synchronism.
Breaker Maintenance: These setpoints correspond to the initialization of (KI)
2
t counters, and the counting of number of
openings and closings of the switchgear configured as breaker.