4-26 F650 Digital Bay Controller GE Multilin
4.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE 4 HUMAN INTERFACES
4
4.1.7.7 LOGIC CONFIGURATION
This logic configuration allows creating more complex configurations, using the graphical PLC, than using the tables from
Relay Configuration. For file management detailed information go to section 4.1.4.
Table 4–15: GENERAL OVERVIEW OF LOGIC CONFIGURATION MENU:
LOGIC CONFIG
*.pep
Header for Logic project: PLC project file containing the necessary
information relative to the relay model, logic libraries included in the
project (*.lib), graphic file name (*.aut), etc.
*.aut
PLC Project file containing all the drawings used by the logic, required by
F650 relay based on IEC 61131-3 standard. Functional block diagram
(FDB).
*.lib
User programmable logic objects: Library file to be included as an object
in a PLC project. Logic packages that can be stored into libraries and be
distributed in different PLC projects.
To Next Page
Loading...
Need help?
General
