GE Multilin F650

10-10 F650 Digital Bay Controller GE Multilin
10.3 EXAMPLE Nº 3 – PROCEDURE TO SET AN OPERATION IN THE F650 RELAY 10 APPLICATION
EXAMPLES
10
10.3.3 TEST
In the main front screen press F2 key.
A message showing “Press Intro to Confirm Key F2” will be displayed.
Press down the rotary knob.
Check that contact_00_00 (board F) has been closed.
Check that the front LED 14
th
is lit.
In the main front screen press F1 key.
A message showing “Press Intro to Confirm Key F1” will be displayed.
Press down the rotary knob.
Check that contact_00_00 (board F) has been opened.
Check that the front LED 14th has been switched off