A-6 F650 Digital Bay Controller GE Multilin
A.1 LOGIC OPERANDS APPENDIX A
A
LEDS HMI (16 elements)
READY LED
Ready LED: (0-Rojo) Relay out of service, protection
OUT OF ORDER (1-Green) Relay in service; protection
READY
LED 1
Programmable LED 1 status: Red colour. Latched by
hardware. Reset by hardware (ESC) and
programmable (LED RESET INPUT)
LED 2
Programmable LED 2 status: Red colour. Latched by
hardware. Reset by hardware (ESC) and
programmable (LED RESET INPUT)
LED 3
Programmable LED 3 status: Red colour. Latched by
hardware. Reset by hardware (ESC) and
programmable (LED RESET INPUT)
LED 4
Programmable LED 4 status: Red colour. Latched by
hardware. Reset by hardware (ESC) and
programmable (LED RESET INPUT)
LED 5
Programmable LED 5 status: Red colour. Latched by
hardware. Reset by hardware (ESC) and
programmable (LED RESET INPUT)
LED 6
Programmable LED 6 status: Orange colour. Not
latched. Latching possibility via PLC. Reset by
hardware (ESC) and programmable (LED RESET
INPUT)
LED 7
Programmable LED 7 status: Orange colour. Not
latched. Latching possibility via PLC. Reset by
hardware (ESC) and programmable (LED RESET
INPUT)
LED 8
Programmable LED 8 status: Orange colour. Not
latched. Latching possibility via PLC. Reset by
hardware (ESC) and programmable (LED RESET
INPUT)
LED 9
Programmable LED 9 status: Orange colour. Not
latched. Latching possibility via PLC. Reset by
hardware (ESC) and programmable (LED RESET
INPUT)
LED 10
Programmable LED 10 status: Orange colour. Not
latched. Latching possibility via PLC. Reset by
hardware (ESC) and programmable (LED RESET
INPUT)
LED 11
Programmable LED 11 status: Green colour. Not
latched. Latching possibility via PLC. Reset by
hardware (ESC) and programmable (LED RESET
INPUT)
LED 12
Programmable LED 12 status: Green colour. Not
latched. Latching possibility via PLC. Reset by
hardware (ESC) and programmable (LED RESET
INPUT)
LED 13
Programmable LED 13 status: Green colour. Not
latched. Latching possibility via PLC. Reset by
hardware (ESC) and programmable (LED RESET
INPUT)
LED 14
Programmable LED 14 status: Green colour. Not
latched. Latching possibility via PLC. Reset by
hardware (ESC) and programmable (LED RESET
INPUT)
LED 15
Programmable LED 15 status: Green colour. Not
latched. Latching possibility via PLC. Reset by
hardware (ESC) and programmable (LED RESET
INPUT)
LEDs reset input (programmable) LED RESET INPUT Programmable input for remote LED reset
Programmable Keypad Status (HMI)
I Key I key operation (Programmable signal via PLC)
O Key O key operation (Programmable signal via PLC)
* Key * key operation (Programmable signal via PLC)
F1 Key F1 key operation (Programmable signal via PLC)
F2 Key F2 key operation (Programmable signal via PLC)
To Next Page
Loading...
