GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
3-50 Section 3-4 - Preparing for Installation
PRELIMINARY
Note: If the driver is already installed proceed as follows:
a.) Click Next.
The following screen appears - see Figure 3-56.
Figure 3-56 Use Existing Driver
b.) Select Keep existing driver and click Next.
c.) Proceed to step 12 (for using the Existing Driver).
11.)Click Have Disk and click Next.
The Install From Disk screen opens - Figure 3-57.
12.)Follow the on-screen instructions (insert the printer installation software disk) and click OK.
Figure 3-57 Install From Disk Screen
To Next Page
Loading...
