GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-81
PRELIMINARY
7-4-6 Probe Select Board Diagnostic Tests (cont’d)
9.) Use the tools provided to scroll through the channels and view the results, as previously described.
10) When done, trackball to the Close button and press Set to close the View Report window.
11) Select the third report (BPF2); the report is highlighted in the Reports list, and the corresponding
results are shown in the Report window below, as shown in Figure 7-51 "View Test Log - ACW BPF
Test - BPF2" on page 7-82.
Figure 7-50 View Test Log - ACW BPF Test - BPF1
To Next Page
Loading...
