GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
8-32 Section 8-3 - Control Console Components Replacement Procedures
PRELIMINARY
9.) Remove the lower cable bracket - Figure 8-36.
10.)Remove the lower roller-screw - Figure 8-36.
11.)Lift the Monitor arm up and away from the Monitor support Securing Pin - Figure 8-37.
Figure 8-36 Lower Cable Bracket and Lower Roller-Screw
Figure 8-37 Monitor Arm and Securing Pin
Lower Roller-Screw
Lower Cable Bracket
To Next Page
Loading...
