GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-101
PRELIMINARY
2.) Loosen (but do not remove) the two lower cable securing brackets, as indicated in Figure 8-119.
3.) Proceed to remove the four cables from the Keyboard Interface Assembly by passing them through
the aperture in the centre of the platform in the following order:
a.) Push the USB cable down through the aperture, as shown in Figure 8-117.
Figure 8-119 Lower Cable Securing Brackets
Figure 8-120 USB Cable
To Next Page
Loading...
