Hamilton G5 - Page 589

624074/07 Index-5
IntelliTrig (intelligent trigger) function
B-25, D-9
Internal battery low alarm 10-22
L
Labeling on ventilator, described 1-26
Lamp, alarm when heliox is in use 10-3
Language, choosing J-3
Leak compensation B-25
Logs. See Event logs
Loss of mains power alarm 10-22
Loss of PEEP alarm 10-23
Low frequency alarm 10-23
Low internal pressure alarm 10-23
Low minute volume alarm 10-24
Low oxygen alarm 10-24
Low PetCO
2
alarm 10-24
Low pressure alarm 10-24
Low tidal volume alarm 10-25
M
Maneuver in progress user message
10-25
Manual breath key, about 1-18
Masimo SpO
2
pulse oximeters
about F-14
alarms, settings F-27, F-29, F-30
configuring F-32
connecting F-39
installation F-39
installation, attaching adapter to rail
F-40
installation, attaching cables F-42
modes of operation F-15
SpO
2
Raw measurements F-19
Spot Check mode, using (Masimo
Rainbow) F-23
Masks, types in NIV D-6
Maximum compensation alarm 10-25
Messages, alarm, list 10-8
MMPs
alarm limits, display on screen 1-23
display on screen 1-23
selecting which to display J-10
Mode window
access to 1-22
ventilation mode, setting 5-7
Modes of ventilation D-9
control settings active in all modes
B-4
overview 1-4
Monitored parameters
accuracies A-20
pulse oximeter related F-17
ranges and resolutions A-20
Monitoring window
overview 1-5
SpO
2
parameters in F-20
SpO2raw tab F-19
Mouthpiece, advantages and
disadvantages for NIV D-6
N
Nebulizer 1-16, 3-17
alarm 3-30
connection to ventilator, location of
1-23
functional test, performing 3-29
installing 3-15
intermittent nebulization 3-27
medication, adding 3-26
module location on ventilator 1-24
on/off key, about 1-18
selecting J-15
Nihon-Kohden SpO
2
pulse oximeter
about F-17
Noninvasive ventilation (NIV)
adverse reactions D-5
alarms D-8
benefits of D-3
checking mask fit and position
D-10
CO
2
rebreathing D-10
contraindications D-5
control settings D-7
maintaining PEEP and preventing
autotriggering D-10
monitored parameters D-8– D-9