Fundamentals, File Management | Working with the file manager
4
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
177
Copying files into another directory
Select a screen layout with two equally sized windows
In the right window
Press the SHOW TREE soft key
Move the cursor to the directory into which you wish to copy
the files, and display the files in this directory with the ENT key
In the left window
Press the SHOW TREE soft key
Select the directory with the files to copy and press the
SHOW FILES soft key to display them
Press the Tag soft key: Call the file tagging
functions
Press the Tag soft key: Position the cursor on the
file you wish to copy and tag. You can tag several
files in this way, if desired
Press the Copy soft key: Copy the tagged files
into the target directory
Further information: "Tagging files", page 181
If you have tagged files in both the left and right windows, the
control copies from the directory in which the cursor is located.
Overwriting files
If you copy files to a directory in which other files are stored under
the same name, the control will ask whether the files in the target
directory should be overwritten:
Overwrite all files (Existing files field selected): Press the OK
soft key, or
To leave the files as they are, press the CANCEL soft key
If you want to overwrite a protected file, select the Protected files
field or cancel the process.
To Next Page
Loading...
Need help?
General
