HEIDENHAIN TNC 620 Programming Station User Manual

Programming Q Parameters | Additional functions
10
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
397
Group
name
Gruppen-
nummerID
Systemdaten-
nummer
Index Description
7 - Tool radius oversize DR2
8 - Tool index
9 - Active feed rate
10 - Cutting speed [mm/min]
Values programmed in TOOL DEF
0 Tool no. Read the number of the tool change
sequence:
0 = Tool already in spindle,
1 = Change between external tools,
2 = Change from internal to external tool,
3 = Change from special tool to external tool,
4 = Load external tool,
5 = Change from external to internal tool,
6 = Change from internal to internal tool,
7 = Change from special tool to internal tool,
8 = Load internal tool,
9 = Change from external tool to special tool,
10 = Change from special tool to internal tool,
11 = Change from special tool to special tool,
12 = Load special tool,
13 = Unload external tool,
14 = Unload internal tool,
15 = Unload special tool
1 - Tool number T
2 - Length
3 - Radius
4 - Index
61
5 - Tool data programmed in TOOL DEF
1 = Yes, 0 = No

HEIDENHAIN TNC 620 Programming Station Specifications

General

Brand	HEIDENHAIN
Model	TNC 620 Programming Station
Category	Control Systems
Language	English