HEIDENHAIN TNC 620 Programming Station

Programming aids | TNCguide: context-sensitive help
Downloading current help files
You’ll find the help files for your control software on the
HEIDENHAIN homepage:
http://content.heidenhain.de/doku/tnc_guide/html/en/index.html
Navigate to the suitable help file as follows:
TNC Controls
Series, e.g. TNC 600
Desired NC software number, e.g.TNC620 (81760x-16)
HEIDENHAIN has simplified the version schema,
starting with NC software version 16:
The publication period determines the
version number.
All control models of a publication period have the
same version number.
The version number of the programming stations
corresponds to the version number of the
NC software.
Select the desired language version from the TNCguide online
help (CHM files) table
Download the ZIP file
Extract the ZIP file
Move the extracted CHM files to the TNC:\tncguide\en directory
or the respective language subdirectory on the control
When using TNCremo to transfer the CHM files to the
control, select the binary mode for files with the .chm
extension.
Language TNC directory
German TNC:\tncguide\de
English TNC:\tncguide\en
Czech TNC:\tncguide\cs
French TNC:\tncguide\fr
Italian TNC:\tncguide\it
Spanish TNC:\tncguide\es
Portuguese TNC:\tncguide\pt
Swedish TNC:\tncguide\sv
Danish TNC:\tncguide\da
Finnish TNC:\tncguide\fi
Dutch TNC:\tncguide\nl
Polish TNC:\tncguide\pl
Hungarian TNC:\tncguide\hu
Russian TNC:\tncguide\ru
Chinese (simplified) TNC:\tncguide\zh
6
HEIDENHAIN | TNC620 | Klartext Programming User's Manual | 01/2022
221