HEIDENHAIN TNC 620 Programming Station User Manual

First Steps with the TNC 620 | Programming the first part
1
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
67
Opening a new program/file management
Press the PGM MGT key
The control opens the file manager.
The file management of the control is arranged
much like the file management on a PC with
Windows Explorer. The file management enables
you to manage data in the control's internal
memory.
Use the arrow keys to select the folder in which
you want to open the new file
Enter any desired file name with the extension
.H
Press the ENT key
The control asks you for the unit of measure for
the new program.
Select the unit of measure: Press the MM or
INCH soft key
The control automatically generates the first and last blocks of the
program. Afterwards you can no longer change these blocks.
Further information on this topic
File management
Further information: "Working with the file manager",
page 171
Creating a new program
Further information: "Creating and writing programs",
page 154

HEIDENHAIN TNC 620 Programming Station Specifications

General

Brand	HEIDENHAIN
Model	TNC 620 Programming Station
Category	Control Systems
Language	English