HEIDENHAIN TNC 620 Programming Station

Special functions | Pulsing spindle speed FUNCTION S-PULSE
Symbols
In the status bar, the icon indicates the condition of the pulsing shaft
speed:
Icon Function
Pulsing spindle speed active
Resetting the pulsing spindle speed
Example
18 FUNCTION S-PULSE RESET
Use the FUNCTION S-PULSE RESET to reset the pulsing spindle
speed.
Proceed as follows for the definition:
Show the soft-key row with special functions
Press the PROGRAM FUNCTIONS soft key
Press the FUNCTION SPINDLE soft key
Press the RESET SPINDLE-PULSE soft key.
10
HEIDENHAIN | TNC620 | Klartext Programming User's Manual | 01/2022
421