HEIDENHAIN TNC 620 Programming Station User Manual

Fundamentals, File Management | Working with the file manager
4
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
195
If you wish to copy from the control to the external data medium,
move the cursor in the left window to the file to be transferred.
If you wish to copy from the external data medium to the control,
move the cursor in the right window to the file to be transferred.
Select another drive or directory: Press the
SHOW TREE soft key
Use the arrow keys to select the desired
directory
Select the desired file: Press the SHOW FILES
soft key
Use the arrow keys to select the file
Transfer a single file: Press the COPY soft key
Confirm with the OK soft key or with the ENT key
A status window appears on the control, informing about the
copying progress, or
Stop transfer: Press the WINDOW soft key
The control displays the standard file manager
window again.

HEIDENHAIN TNC 620 Programming Station Specifications

General

Brand	HEIDENHAIN
Model	TNC 620 Programming Station
Category	Control Systems
Language	English