HEIDENHAIN TNC 620 Programming Station

Basic information | Control model, software and features
Advanced Programming Features (option 19)
Fixed cycles:
Peck drilling, reaming, boring, counterboring, centering
Milling internal and external threads
Milling of rectangular and circular pockets and studs
Clearing level and oblique surfaces
Milling of straight and circular slots
Circular and linear point patterns
Contour train, contour pocket, trochoidal contour slot
Engraving
OEM cycles (special cycles developed by the machine tool builder)
can be integrated
Advanced Graphic Features (option 20)
Expanded graphic functions Program-verification graphics, program-run graphics
Plan view
Projection in three planes
3-D view
Advanced Function Set 3 (option 21)
Expanded functions Group 3 Tool compensation:
M120: Radius-compensated contour look ahead for up to 99 NC blocks
(LOOK AHEAD)
3-D machining:
M118: Superimpose handwheel positioning during program run
Pallet Management (option 22)
Pallet management Processing workpieces in any sequence
CAD Import (option 42)
CAD import Support for DXF, STEP and IGES
Adoption of contours and point patterns
Simple and convenient specification of presets
Selecting graphical features of contour sections from conversational
programs
KinematicsOpt (option 48)
Optimizing the machine kinematics Backup/restore active kinematics
Test active kinematics
Optimize active kinematics
OPC UA NC Server (1 to 6) (options 56 to 61)
Standardized interface The OPC UA NC Server provides a standardized interface (OPCUA) for
external access to the control's data and functions
These software options allow you to create up to six parallel client
connections
1
HEIDENHAIN | TNC620 | Klartext Programming User's Manual | 01/2022
37