HP StorageWorks P9000 - Disk Arrays Reference Guide

++{LDKC:CU:LDEV,LDEV Result}=[{0x00:0x00:0x00,Normal end},
{0x00:0x00:0x01,Normal end},{0x00:0x00:0x02,Normal end}],
Num. of LDEVs = 3
Detailed Information
DescriptionItem
The pool ID of the created or expanded pool.Pool ID
The pool type.
Snapshot or Thin Provisioning
Pool Type
Whether the multi-tier mode of the created or expanded pool is enabled or disabled.
0x80: Enable, 0x00: Disable
Multi Tier Pool
The warning threshold of the usage rate of the created or expanded pool. The unit is percent
(%).
Warning Threshold(%)
The depletion threshold of the usage rate of the created or expanded pool. The unit is percent
(%).
The item does not output in the case of not specifying the depletion threshold.
The threshold of the usage rate of the created or expanded pool.
The unit is percent (%).
Depletion
Threshold(%)
The rate of remaining capacity for created or expanded pool in percent (%).Subscription Limit(%)
The auto control mode of the created or expanded pool.
0x40: Auto, 0x00: Manual
Tier Management
The cycle of performance monitoring for the created or expanded pool.
1: every one hour, 2: every two hours, 4: every four hours, 8: every eight hours, 129: every
one day
Cycle Time
The monitoring period of the pool. Format: “H1:M1-H2:M2” H1: The time when the monitoring
starts (hour) M1: The time when the monitoring starts (minute) H2: The time when the monitoring
ends (hour) M2: The time when the monitoring ends (minute).
Monitoring Period
The result of pool creation or expansion.
Normal end: Normal end, Error (xxxx-yyyy): Abnormal end, Not Execute: Not Executed
xxxx: Part code, yyyy: Error code
Pool Result
The number of the created or expanded pools.Num. of Pools
The LDKC number, the CU number and the LDEV number of the pool volume assigned to the
created or expanded pool.
LDKC:CU:LDEV
The result of the assigning the pool volume to the created or expanded pool.
Normal end: Normal end, Error (xxxx-yyyy): Abnormal end, Not Execute: Not Executed
xxxx: Part code, yyyy: Error code
LDEV Result
The number of the created or expanded pool volume.Num. of LDEVs
[PROV] Delete Host Group
This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Delete Host Group,,Normal end,
104 Audit log examples

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English