DescriptionItem
The mounting location of PDEV that is the target of Alter or error reset.PDEV
The number of PDEVs.Num. of PDEVs
Install Descriptions
[Install] Add Host Group
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Add Host Group,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,HostGrpName,Mode,Option[0:31],Option[32:63],
Option[64:95]}={XX,0xXXX,XXXXXXXXXXXXXXXX,0xXX,0xXXXXXXXX,
0xXXXXXXXX,0xXXXXXXXX}
++{WWN,Nickname}=[{0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX},
{0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}],Num. of WWNs=2
+{Port,HostGrpID,HostGrpName,Mode,Option[0:31],Option[32:63],
Option[64:95]}={XX,0xXXX,XXXXXXXXXXXXXXXX,0xXX,0xXXXXXXXX,
0xXXXXXXXX,0xXXXXXXXX}
+Num. of Host Groups=2
Detailed Information
DescriptionItem
The name of the port where the host group has been newly added.Port
The host group number newly added.HostGrpID
The name of the newly added host group.HostGrpName
The newly added host mode. Please see the HP StorageWorks P9000 Provisioning for Open
Systems User Guide for the meaning of the host mode number.
Mode
The newly added host mode option. Hexadecimal values are output.Option[0:31]
Option[32:63]
Option[64:95]
Indicates WWN of the host bus adapter for the host registered in the host group.WWN
The nickname of the host bus adapter for the host registered in the host group.Nickname
The number of WWNs of the host registered in the host group.Num. of WWNs
The number of added host groups.Num. of Host Groups
[Install] Add LU Path
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Add LU Path,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,LUN,LDKC:CU:LDEV}=[{XX,0xXXX,0xXXX,
0xXX:0xXX:0xXX},{XX,0xXXX,0xXXX,0xXX:0xXX:0xXX},
{XX,0xXXX,0xXXX,0xXX:0xXX:0xXX}],Num. of Paths=3
56 Audit log examples
To Next Page
Need help?
General