from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+FileName=script.spt
Basic Information
DescriptionParameter
The script has been executed.Run
The script has been suspended.Stop
The script has been completed.End
Detailed Information
DescriptionItem
The file name of the executed script.FileName
[Cnt Ac-S Z] Suspend Pair
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Suspend Pair,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{VOL(LDKC:CU:LDEV),PairVOL(LDEV),Type,SSB,Kind,Result}
=[{0x00:0x00:0x00,0xFE,M-VOL,Disable,R-VOL,Normal end},
{0x00:0x00:0x01,0xFF,M-VOL,Disable,R-VOL,Normal end},(snip)
-(snip)],Num. of Pairs=xx
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the connected volume in the split (suspended) pair.VOL(LDKC:CU:LDEV)
The LDEV number of the paired volume in the split (suspended) pair.PairVOL(LDEV)
The volume type of the connected volume. M-VOL: Main volume, R-VOL: Remote volumeType
The SSB[F/M=FB] option setting. Enable: Notified, Disable: Not notifiedSSB
The suspend type set.
M-VOL Failure: Main volume write is disabled-VOL: Main volume write is enabled
Kind
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of split pairs.Num. of Pairs
Continuous Access Journal Descriptions
[Cnt Ac-J] Change-JNL-Option
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J],Change-JNL-Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC,JNL,Data Overflow Watch(s),Inflow Control,
Continuous Access Journal Descriptions 157
To Next Page
Need help?
General
