HP StorageWorks P9000 - Disk Arrays - [BC Z] Delete Pair; [BC Z] Initialize; [BC Z] Option

Detailed Information
DescriptionItem
The consistency group number.CTG
Indicates whether the CT group (consistency group) is newly registered or the existing CT group
is deleted.
Add: Registration of CT group, Delete: deletion of CT group
Command
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of CT groups registered or deleted.Num. of CTGs
[BC Z] Delete Pair
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[BC Z],Delete Pair,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{S-VOL(LDKC:CU:LDEV),T-VOL(LDKC:CU:LDEV),Result}
=[{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD,Normal end},
{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD,Error(xxxx-yyyy)}],
Num. of Pairs=2
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the source volume in the deleted pair.S-VOL(LDKC CU:LDEV)
The LDKC, CU, and LDEV numbers of the target volume in the deleted pair.T-VOL(LDKC CU:LDEV)
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of deleted pairs.Num. of Pairs
[BC Z] Initialize
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[BC Z],Initialize,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
[BC Z] Option
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[BC Z],Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Swap & Freeze=Enable,HOST I/O Performance
=Enable,FC Slower Copy1=Enable,FC Slower Copy2
=Disable,Reserve05=Enable,(snip),Reserve32=Disable
Business Copy Z Descriptions 143