HP StorageWorks P9000 - Disk Arrays - [Cnt Ac-J Z] Journal-Vol

DescriptionItem
The serial number of the logical device (storage system).S/N
The controller ID.CTRLID
The LDKC, CU, and LDEV numbers of the remote command device.Cmd.Dev.(LDKC:CU:LDEV)
The result of the operation.
Normal end: normal end, Error(xxxx-yyyyy): abnormal end
xxxx: part code, yyyyy: error code
Result
The number of extended consistency groups for which the configuration has been
changed.
Num. of EXCTGs
[Cnt Ac-J Z] Journal-Vol
Example 1: adding journal volumes
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J Z],Journal-Vol,Add,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC,JNL,Timer Type}={0x00,0x001,System}
++{LDKC:CU:LDEV,Result}=[{0x00:0xD7:0x01,Normal end},
{0x00:0xD7:0x03,Normal end},{0x00:0xD7:0x05,Normal end}]
+{LDKC,JNL,Timer Type}={0x00,0x002,System}
++{LDKC:CU:LDEV,Result}=[{0x00:0xD8:0x21,Normal end},
{0x00:0xD8:0x23,Normal end},{0x00:0xD8:0x25,Normal end}]
+Num. of JNLs=2
Example 2: deleting journal volumes
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J Z],Journal-Vol,Delete,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC,JNL}={0x00,0x001}
++{LDKC:CU:LDEV,Result}=[{0x00:0xD7:0x01,Normal end},
{0x00:0xD7:0x03,Normal end},{0x00:0xD7:0x05,Normal end}]
+{LDKC,JNL}={0x00,0x002}
++{LDKC:CU:LDEV,Result}=[{0x00:0xD8:0x21,Normal end},
{0x00:0xD8:0x23,Normal end},{0x00:0xD8:0x25,Normal end}]
+Num. of JNLs=2
Basic Information
DescriptionParameter
The journal volume is deleted.Add
The journal volume is deleted.Delete
Detailed Information
DescriptionItem
The LDKC number where the journal belongs.LDKC
The journal number.JNL
The timer type. System: System timer, Local: Local timer, None: No timerTimer Type
The LDKC, CU, and LDEV numbers.LDKC:CU:LDEV
Continuous Access Journal Z Descriptions 169