EasyManua.ls Logo

HP StorageWorks P9000 - Disk Arrays - [Cnt Ac-S Z] Change Option

HP StorageWorks P9000 - Disk Arrays
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the volume specified to the main volume when the
pair is created.
M-VOL(LDKC:CU:LDEV)
The LDEV number of the volume specified to the remote volume when the pair is created.R-VOL(LDEV)
The serial number of the device.S/N
The LDKC number of the paired LDKC.LDKC
Indicates SSID.SSID
The controller ID.Controller ID
The update copy mode set; Sync: Synchronous modeType
The initial copy mode set; Entire: Copy all, None: Do not copy.Initial Copy
The fence level set (the condition that MCU rejects the write operation to the main volume.)
Never: No condition, Data: S-VOL data, Status: S-VOL status.
Fence Level
The initial copy speed set (the number of tracks you can copy at a time).Copy Pace
The priority of the initial copy operation set (scheduling order).Priority
The unit of the differential management set: Auto, Cylinder, Track.Diff
Indicates whether the setting to copy the CFW data to the remote volume is enabled or
not. Only M-VOL: Copy to main volume only is enabled Copy to R-VOL: Copy to main and
remote volume is enabled.
CFW
Indicates whether DFW use to the remote volume is set or not.
Not Required: DFW not required, Required: DFW required
DFW
Indicates whether or not the host I/O time stamp is transferred to R-VOL when the pair is
created.
Enable: transferred, Disable: not transferred
TS
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of created pairs.Num. of Pairs
[Cnt Ac-S Z] Change Option
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Change Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Max Initial Copy,CU Activity,Path Blockade Watch(s),
Path Blockade SIM Watch(s),Service SIM}={128,Enable,45,070,
Not Report}
+{LDKC,CU,Service SIM,PPRC Support,SCP Time(s),Max Initial Copy}
=[{0x00,0x00,Not Report,Yes,600,04},
{0x00,0x01,Not Report,Yes,600,04},
{0x00,0x02,Not Report,Yes,600,04},
{0x00,0x03,Not Report,Yes,600,04},
{0x00,0x04,Not Report,Yes,600,04},(snip)-(snip)],Num. of CUs=255
Continuous Access Synchronous Z Descriptions 153

Table of Contents

Other manuals for HP StorageWorks P9000 - Disk Arrays

Related product manuals