HP StorageWorks P9000 - Disk Arrays - [Cnt Ac-S] Pairsplit-R

Detailed Information
DescriptionItem
The port number, host group number and LUN of the primary volume in the restored pair
sequentially.
P-VOL(Port-G-ID-LUN)
The port number, host group number and LUN of the secondary volume in the restored
pair sequentially.
S-VOL(Port-G-ID-LUN)
The fence level set (the condition that MCU rejects Write to the primary volume).
Never: No condition, Data: S-VOL data, Status: S-VOL status
Fence Level
The initial copy speed set (the number of tracks you can copy at a time).Copy Pace
The priority of restoring operation set (scheduling order).Priority
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of restored pairs.Num. of Pairs
[Cnt Ac-S] Pairsplit-r
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S],Pairsplit-r,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),
Type,S-VOL Write,Kind,Result}
=[{1A-0x00-0x000,1B-0x00-0x000,P-VOL,Disable,S-VOL,Normal end},
{1A-0x00-0x001,1B-0x00-0x001,P-VOL,Disable,S-VOL,Normal end},
(snip)
-(snip)],Num. of Pairs=xx
Detailed Information
DescriptionItem
The port number, host group number, and LUN of the primary volume in the split pair
sequentially.
P-VOL(Port-G-ID-LUN)
The port number, host group number, and LUN of the secondary volume in the split pair
sequentially.
S-VOL(Port-G-ID-LUN)
The volume type of the volume on the primary site.
P-VOL: Primary volume, S-VOL: Secondary volume
Type
Indicates whether writing to the secondary volume is enabled.
Enable: Writing is enabled
Disable: Writing is disabled
S-VOL Write
The suspend type set.
P-VOL Failure: Writing to the P-VOL is disabled
S-VOL: Writing to the P-VOL is enabled
Kind
Continuous Access Synchronous Descriptions 151