[Maintenance] PCB Restore
Example
07xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,SVP,uid=maintenance,0,,
[Maintenance],PCB Restore,,Error,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PCB=[CACHE-2CC],Num. of PCBs=1
Detailed Information
DescriptionItem
The PCB.PCB
The number of PCBs.Num. of PCBs
[Maintenance] Pre QuickFormat Stop
This log information is output when the Quick Format process is suspended.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Maintenance],Pre QuickFormat Stop,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PG=[1-1],Num. of PGs=1
+LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1
Detailed Information
DescriptionItem
The parity group number.PG
The number of parity groups.Num. of PGs
The LDEV number.LDEV
The number of LDEVs.Num. of LDEVs
[Maintenance] Quick Format
The logged information indicates that the Quick Format operation was only requested but not
finished.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Maintenance],Quick Format,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PG=[1-1],Num. of PGs=1
+LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1
Basic Information
The parameter Progress Error is output when a failure is detected while displaying the progress of
the Quick Format process.
Maintenance Descriptions 87
To Next Page
Loading...
Need help?
General