HP StorageWorks P9000 - Disk Arrays - [Ext Stor] Disconnect es Vols; [Ext Stor] Edit es Path Config

{1A,50560E8000C3E211,Normal end},{2A,50560E8000C3E212,
Normal end}],Num. of Paths=3
Detailed Information
DescriptionItem
The port name of the external port of the local storage system.Port
The WWN of the Target port of the external storage system.WWN
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of mapping paths that has been disconnected.Num. of Paths
[Ext Stor] Disconnect ES VOLs
If this operation is performed from Remote Web Console, this logged information indicates that
this operation was only requested but not completed. However, if this operation is performed from
CLI (or if this logged information appears between the CflSet Start operation and the CflSet End
operation), this logged information indicates that the Disconnect-Volume operation was completed.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Ext Stor],Disconnect ES VOLs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,Seq.=xxxxxxxxxx
+{Group,Result}=[{E1-1,Normal end},{E1-2,Normal end},
{E1-3,Normal end},{E1-4,Normal end}],Num. of Groups=4
Detailed Information
DescriptionItem
The group number of the disconnected external volume.Group
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of external volume groups that contain the disconnected external volume.Num. of Groups
[Ext Stor] Edit ES Path Config
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Ext Stor],Edit ES Path Config,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{ExGroup,PathGroup,Result}={E1-1,1,Normal end}
++{Port,WWN,LUN,PathResult}
=[{1A,50560E8000C3E211,0x0001,Normal end},
{2A,50560E8000C3E212,0x0001,Normal end},
{3A,50560E8000C3E213,0x0001,Normal end},
{4A,50560E8000C3E214,0x0001,Normal end}],Num. of Paths=4
+{ExGroup,PathGroup,Result}={E1-2,1,Normal end}
++{Port,WWN,LUN,PathResult}
=[{1A,50560E8000C3E211,0x0002,Normal end},
{2A,50560E8000C3E212,0x0002,Normal end},
{3A,50560E8000C3E213,0x0002,Normal end},
External Storage Descriptions 177