HP StorageWorks P9000 - Disk Arrays - [PROV] Format Ldevs; [PROV] Format Ldevs(H); [PROV] Format Ldevs(Q)

Detailed Information
DescriptionItem
The LDKC number, the CU number, and the LDEV number of the V-VOLLDKC:CU:LDEV
The pool ID of the pool corresponding to the expanded V-VOLPool ID
The capacity of the V-VOL after expanding in LBAsCapacity
The number of the expanded V-VOLsNum. of VOLs
[PROV] Format LDEVs
The logged information indicates that the Format operation was only requested but not completed.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Format LDEVs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+LDKC:CU:LDEV=[0x00:0x00:0x01,0x00:0x00:0x02,0x00:0x00:0x03,
0x00:0x00:0x04,0x00:0x00:0x05,0x00:0x00:0x06,0x00:0x00:0x07,
0x00:0x00:0x08,0x00:0x00:0x09,0x00:0x00:0x0A],
Num. of LDEVs=10
Detailed Information
DescriptionItem
The LDKC number, the CU number, and the LDEV number.LDKC:CU:LDEV
The number of LDEVs to be formatted.Num. of LDEVs
[PROV] Format LDEVs(H)
The logged information indicates that the Format operation using the Write to Control Blocks
function was only requested but not completed.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Format LDEVs(H),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+LDKC:CU:LDEV=[0x00:0x00:0x01,0x00:0x00:0x02,
0x00:0x00:0x03,0x00:0x00:0x04,0x00:0x00:0x05,
0x00:0x00:0x06,0x00:0x00:0x07,0x00:0x00:0x08,
0x00:0x00:0x09,0x00:0x00:0x0A],Num. of LDEVs=10
Detailed Information
DescriptionItem
The LDKC number, the CU number, and the LDEV number.LDKC:CU:LDEV
The number of LDEVs to be formatted.Num. of LDEVs
[PROV] Format LDEVs(Q)
The logged information indicates that the Quick Format operation was only requested but not
completed.
120 Audit log examples