5 Audit log examples for command sent from the host
This chapter provides examples and descriptions of the audit logs produced by commands sent
from hosts or computers using the RAID Manager.
For the detailed information of version numbers in log output examples, see Table 4 (page 16).
Config Command
0701,Y07xx,YYYY/MM/DD,HH:MM:SS.xxx,+09:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,from=host-name,,Seq.=xxxxxxxxxx
+0001020300000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF
• Out-of-band
The computer using the RAID Manager.
• from=host-name
The name of the host that sent the command.
• Detailed Information
The commands and the parameters that the storage system received from the host are output.
FC-SP
07xx,YYYY/MM/DD,HH:MM:SS.xxx,+09:00,Out-of-band,uid=user-name, OPEN,<Host>,,,
[FC-SP],,,Normal end,from=xxxxxxxxxxxxxxxx,,Seq.=xxxxxxxxxx
• In-band OPEN
The host is an open-system host.
• from=xxxxxxxxxxxxxx
WWN of the host that sent the command.
User Auth
07xx,YYYY/MM/DD,HH:MM:SS.xxx,+09:00,Out-of-band,uid=user-name, OPEN,uid=user-name,
195,,[User Auth],Login,,Normal end,from=xxxxxxxxxxxxxxxx,
AP=0xXXXX,Seq.=xxxxxxxxxx
0701,YYYY/MM/DD,HH:MM:SS.xxx,+09:00,In-band OPEN,uid=user-name,
195,,[User Auth],Logout,,Normal end,from=xxxxxxxxxxxxxxxx,
AP=0xXXXX,Seq.=xxxxxxxxxx
• In-band OPEN
The host is an open-system host.
• from=xxxxxxxxxxxxxx
WWN of the host that sent the command.
• AP=0xXXXX
Internal ID used by the host and the storage system.
190 Audit log examples for command sent from the host
To Next Page
Loading...
