HP StorageWorks P9000 - Disk Arrays - [Cnt Ac-J Z] Resume-Pair

DescriptionItem
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of mirrors changed.Num. of Mirrors
[Cnt Ac-J Z] Resume-Pair
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J Z],Resume-Pair,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),MirrorID,S/N,CTRLID,
Priority,Range,M-JNL,R-JNL,Error Level,Resync Mode,Result}
=[{0x00:0x00:0x00,0x00:0x20:0x00,0x00,65432,5,7,Volume,0x002,
0x000,Volume,Normal,Normal end},
-{0x00:0x00:0x01,0x00:0x20:0x01,0x00,65432,5,7,Volume,0x003,
0x001,Volume,Normal,Normal end}],Num. of Pairs=2
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the primary data volume.P-VOL(LDKC:CU:LDEV)
The LDKC, CU, and LDEV numbers of the secondary data volume.
N/A will be output for CU and LDEV numbers when it is set by using spreadsheet.
S-VOL(LDKC:CU:LDEV)
The mirror ID.MirrorID
The serial number of the logical device (storage system).S/N
The controller ID.
N/A will be output when it is set by using spreadsheet.
CTRLID
The priority of copy.Priority
The range to restore the pair.
Mirror: Mirror range. Volume: Volume range
Range
The master journal number.M-JNL
The restore journal number.
N/A will be output when it is set by using spreadsheet.
R-JNL
The error level.
Mirror: Mirror level. Volume: Volume level
Error Level
Indicates the resync mode.Normal: normal resync, Delta: delta resync, Return to standby:
return to standby status
Resync Mode
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of pairs.Num. of Pairs
172 Audit log examples