Use of Cache,Result}
=[{0x00,0x001,20,Yes,Not Use,Normal end},
{0x00,0x002,20,No,Use,Normal end}],Num. of JNLs=2
Detailed Information
DescriptionItem
The LDKC number of the journal.LDKC
The journal number.JNL
The overflow watch time of the metadata or journal data, measured in seconds.Data Overflow
Watch(s)
Indicates whether inflow control is executed or not.
Yes: Controlled, No: Not controlled
Inflow Control
Whether to store the journal data in the restore journal in cache.
Use: Store the journal data in cache. Not Use: Store the journal data in journal volume
Use of Cache
The result of the operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of journals.Num. of JNLs
[Cnt Ac-J] Change-Mirror-Option
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J],Change-Mirror-Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC,JNL,MirrorID,Copy Pace,Path Watch Time,
Forward Path Watch Time,Transfer Speed(Mbps),
Delta resync Failure,Result}
=[{0x00,0x001,0x00,500,12(hour),Yes,100,Entire,Normal end},
{0x00,0x002,0x00,150,1(day),No,
10,None,Normal end}],Num. of Mirrors=2
Detailed Information
DescriptionItem
The LDKC number of the journal.LDKC
The journal number.JNL
The mirror ID.MirrorID
The speed of initial copy.
150: Low speed, 500: Medium speed, 1500: High speed
Copy Pace
The path blockade watch period set. The units are minutes, hours or days. If it is set to 30
minutes, it will be 30 (min.).
Path Blockade Watch(m)
Indicates whether to transfer the path blockade watch period of the master journal to the
restore journal.
Yes: Transfer, No: Do Not Transfer.
Forward Path Blockade
Watch
The transfer speed of the communication line. The unit is megabits per second (Mbps).Speed of Line(Mbps)
158 Audit log examples
To Next Page
Loading...
Need help?
General