HP StorageWorks P9000 - Disk Arrays - [Install] Install CV

DescriptionItem
Master SVP details are provided in the format described below.
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
M-SVP
IPv4(IPAddress,Subnet Mask)
IPv6(IPAddress, Subnet
Prefix length)
Standby SVP details are provided in the format described below.
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
S-SVP
IPv4(IPAddress,Subnet Mask)
IPv6(IPAddress, Subnet
Prefix length)
[Install] Install CV
This logged information indicates that the formatting was only requested but not finished. If the
operation does not require the formatting, this logged information indicates that the volume was
created.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Install CV,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{PG,LDKC:CU:LDEV,Slot,Emulation,Size,Unit,System Disk,SSID,MPB}
=[{1-1,0x00:0x00:0x00,-,OPEN-V,10000,LBA,Disable,
0x0005,Auto}],Num. of LDEVs=1
Basic Information
DescriptionParameter
Unformatted Install CV.Non Format
The progress window of LDEV format is closed.Progress Close
Quick Format is selected.Quick Format
The progress window of preparing for Quick Format is closed.Quick Format Close
Note: No parameter is output for any case other than those described in this table.
Detailed Information
DescriptionItem
The parity group number.PG
The LDKC, CU, and LDEV numbers.LDKC:CU:LDEV
The slot number.Slot
The emulation type.Emulation
The CV capacity.Size
The CV unit capacity.Unit
The setting status of system disk.Disable or Enable will appear.System Disk
The subsystem ID.SSID
The ownership of the MPB.MPB
The number of LDEVs.Num. of LDEVs
68 Audit log examples