[Cnt Ac-J] Pairsplit-S
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J],Pairsplit-S,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),MirrorID,S/N,CTRLID,
Type,Range,Delete Mode,Result}=[{4C-0x00-0x000,4A-0x00-0x000,
0x00,67676,6,P-VOL,LU,Normal,Normal end},{4C-0x00-0x001,
4A-0x00-0x001,0x00,67676,6,P-VOL,LU,Normal,Normal end}],
Num. of Pairs=2
Detailed Information
DescriptionItem
The port number, host group number and LUN of the primary data volume.P-VOL(Port-G-ID-LUN)
The port number, host group number and LUN of the secondary data volume.S-VOL(Port-G-ID-LUN)
The mirror ID.MirrorID
The serial number of the logical device (storage system).S/N
The controller ID.CTRLID
Indicates whether the deleted data volume is a primary or secondary data volume.
P-VOL: Primary, S-VOL: Secondary
Type
The delete range.
LU: LU range, Mirror: Mirror range
Range
The delete mode.
Normal: Normal mode, Force: Force mode
Delete Mode
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code,yyyyy: Error code
Result
The number of pairs.Num. of Pairs
[Cnt Ac-J] Pair-Option
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J],Pair-Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),MirrorID,M-JNL,R-JNL,
Error Level,Result}=[{4C-0x00-0x000,4A-0x00-0x000,0x00,0x001,
0x001,Mirror,Normal end},{4C-0x00-0x001,4A-0x00-0x001,0x00,0x001,
0x001,Mirror,Normal end}],Num. of Pairs=2
Detailed Information
DescriptionItem
The port number, host group number and LUN of the primary data volume.P-VOL(Port-G-ID-LUN)
The port number, host group number and LUN of the secondary data volume.S-VOL(Port-G-ID-LUN)
The mirror ID.MirrorID
Continuous Access Journal Descriptions 163
To Next Page
Loading...
Need help?
General