[Auto LUN] Set Auto Plan Param
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Auto LUN],Set Auto Plan Param,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{SetType,PlanSwitch,PlanType,PlanDay,MonitorPeriod,
SampleCount}
=[{Default,Enable,Once a month,31,00:30-24:00,ALL}],
Num. of Data = 1
Detailed Information
DescriptionItem
The executed operation.
Default: The default auto migration plan is applied (click the Default, and then click the Set).
Customize: The customized auto migration plan is applied (click the Set after changing the
value of the auto migration plan parameter).
SetType
Indicates whether the auto migration plan settings are enabled or disabled.
Disable or Enable is output.
PlanSwitch
The specified sampling term.
One of these values is output:
• None
• Every day
• Once every X days (For the value of X, see PlanDay index below)
• Once a week
• Once a month
PlanType
The setting value for sampling term. The output value depends on the sampling term output to
PlanType.
• If None is output to PlanType, nothing is output to PlanDay.
• If Every day is output to PlanType, nothing is output to PlanDay.
• If Once every X days is output to PlanType, the sampling interval is indicated.
• If Once a week is output to PlanType, the specified day of the week is output to
PlanDay.SUN, MON, TUE, WED, THE, FRI, or SAT is output.
• If Once a month is output to PlanType, the specified day from 1 to 31 is output to PlanDay
PlanDay
The target time zone for the sampling. The left side of the hyphen (-) indicates the start time of
sampling, and the right side indicates the end time.
MonitorPeriod
The target data for making plan (the range of the usage rate that is analyzed by the auto
migration function)
All: All sampling data
XX: The sampling data from the first to 96th.
SampleCount
The number of setting. 1 is always output.Num. of Data
[Auto LUN] Set Class Threshold
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Auto LUN],Set Class Threshold,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Auto LUN Descriptions 183
To Next Page
Loading...
Need help?
General