Detailed Information
DescriptionItem
The name of the port that the fibre address has been set.Port
It displays the address of Fibre Channel port after the setting.
The outside of parenthesis indicates AL-PA and the inside of parenthesis indicates the loop ID.
Fibre Addr.
The number of ports where address has been set.Num. of Ports
[PROV] Set Fibre Topology
This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set Fibre Topology,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fabric,Connection}
=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},
{XX,Enable,P-to-P},{XX,Disable,P-to-P}],Num. of Ports=4
Detailed Information
DescriptionItem
The name of the port where the topology of Fibre Channel is set.Port
Indicates whether the Fabric switch is enabled or disabled.
Enable: Enabled, Disable: Disabled
Fabric
The connecting mode of the Fabric switch selected.
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
Connection
The number of ports where the topology of Fibre Channel is set.Num. of Ports
[PROV] Set Host Mode
This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set Host Mode,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,Mode,Option[0:31],Option[32:63],Option[64:95]}
=[{XX,0xXXX,0x00,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX},{XX,0xXXX,
0x4F,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX}],Num. of Host Groups=2
Detailed Information
DescriptionItem
The name of the port where the host group is created.Port
The host group number.HostGrpID
The host mode set. Please see the HP StorageWorks P9000 Provisioning for Open Systems User
Guide for the meaning of the host mode number.
Mode
Provisioning Descriptions 129
To Next Page
Loading...
Need help?
General