Basic Information
DescriptionParameter
Detailed information is output to the syslog server.Detail Flag=Enable
Detailed information is not output to the syslog server.Detail Flag=Disable
Detailed Information
No detailed information is output when no setting is changed.
DescriptionItem
Indicates whether to output detailed information to the syslog server.
Enable: Output detailed information. Disable: Do not output detailed information.
DetailFlg
The location identification information of the storage system. Not output when setting is not
changed.
LocationInfo
The syslog server to which information is output. Not output when setting is not changed.
Primary: Primary syslog server. Secondary: Secondary syslog server.
ServerType
The version number of the internet protocol. If the setting is not changed, a hyphen (-) is
displayed.
IPv6: Internet Protocol Version 6. IPv4: Internet Protocol Version 4
IPAddrVer
Whether to transfer the syslog information to the syslog server.
Enable: Transfer syslog information. Disable: Do not transfer syslog information.
OutFlg
The IP address to which the syslog information is sent. If the setting is not changed, a hyphen
(-) is displayed.
SrvAddr
The port number of the LAN when sending the syslog information. If the setting is not changed,
a hyphen (-) is displayed.
SrvPortNum
[AuditLog] SIM Complete
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[AuditLog],SIM Complete,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Reference Code=[0x7C0300],Num. of Reference Codes=1
Detailed Information
DescriptionItem
The SIM reference code which error and service request is solved.Reference Code
The number of SIM reference code which error and service request is solved.Num. of Reference
Codes
ACM Descriptions
[ACM] Add Users
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx,+00:00,RMI AP,uid=user-name,1,
Task Name,[ACM],Add Users,,Normal end,
ACM Descriptions 39
To Next Page
Loading...
Need help?
General