HP StorageWorks P9000 - Disk Arrays Reference Guide

[PROV] Edit LDEVs(Tier)
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit LDEVs(Tier),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Pool ID,LDKC:CU:LDEV,Tier Relocation}
=[{1,0x00:0x01:0x0F,0x80}],Num. of LDEVs = 1
Detailed Information
DescriptionItem
The pool number of the edited LDEV.Pool ID
The LDKC number, CU number and the LDEV number of the edited volume.LDKC:CU:LDEV
Whether the tier relocation is enabled or disabled.
0x80: Enable, 0x00: Disable
Tier Information
The number of the edited LDEVs.Num. of LDEVs
[PROV] Edit MP Blades
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit MP Blades,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{DKC,MP Blade ID,AutoAssignment,Result}
=[{0,0,Enable,Normal end}],Num. of MpBlades=1
Detailed Information
DescriptionItem
The DKC number (0 to 1).DKC
The MP Blade number in the DKC module displayed in the window (0 to 7).MP Blade ID
Indicates whether the auto assignment setting is enabled or disabled.
Enable or Disable will appear.
AutoAssignment
The result of the operation
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of specified MP Blades (1 to 8).Num. of MpBlades
[PROV] Edit Ports(Address)
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Ports(Address),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num. of Ports=2
114 Audit log examples

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English