HP StorageWorks P9000 - Disk Arrays Reference Guide

DescriptionItem
The LDKC number of the paired LDKC.RCU LDKC
The path group ID of the path deleted. When the path group is a default setting, “Default” is
output.
Path Gr.ID
The controller ID of the RCU where the path has been deleted.Controller ID
The CU number of the connected CU.MCU
The CU number of the paired CU.RCU
Indicates SSID.SSID
The port number of MCU.MCU Port
The port number of RCU.RCU Port
The number of path pairs deleted.Num. of Port Pairs
[RCU] Delete RCU
Example 1: CU Free is used
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[RCU],Delete RCU,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID}
={99999,0x00,0x00,Default,5}
Example 2: CU Free is not used
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[RCU],Delete RCU,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{S/N,MCU LDKC,MCU,RCU LDKC,SSID}
={99999,0x00,0x3F,0x00,0x0004}
Detailed Information
DescriptionItem
The serial number of the device of RCU deleted.S/N
The LDKC number of the connected LDKC.MCU LDKC
The LDKC number of the paired LDKC.RCU LDKC
The path group ID of the RCU deleted. When the path group ID is a default setting, “Default”
is output.
Path Gr.ID
The controller ID of the RCU deleted.Controller ID
The CU number of the connected CU.MCU
The SSID of the RCU deleted.SSID
Remote Maintenance Descriptions
[Remote Maintenance] PS Control
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RM AP,,,,
[Remote Maintenance],PS Control,,Normal end,,,Seq.=xxxxxxxxxx
+PS Control=OFF
136 Audit log examples

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English