HP StorageWorks P9000 - Disk Arrays Reference Guide

DescriptionItem
The specified host mode option. The host mode options are configured with 96 units of 0 to 95,
and are divided into 32 units to output. Please see Table 12 (page 111) to Table 14 (page 113)
for the relation of output values and host mode option.
Please see the HP StorageWorks P9000 Provisioning for Open Systems User Guide for the
meaning of the host mode number.
Option[0:31]
Option[32:63]
Option[64:95]
The number of host groups that the host mode setting is changed.Num. of Host Groups
[PROV] Set Security Switch
This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set Security Switch,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Switch}=[{XX,Disable},{XX,Enable}],Num. of Ports=2
Detailed Information
DescriptionItem
The name of the port where the LUN security setting is changed.Port
Indicates whether the LUN security setting is enabled or disabled.
Disable or Enable will appear.
Switch
The number of ports where the LUN security setting is changed.Num. of Ports
[PROV] Set SSID
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Set SSID,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{SSID,LDKC:CU:LDEV}
=[{0xXXXX,0xXX:0xXX:0xXX},{0xXXXX,0xXX:0xXX:0xXX}],
Num. of SSIDs=2
Detailed Information
DescriptionItem
The SSID number.SSID
The LDKC, CU, and LDEV numbers.LDKC:CU:LDEV
The number of SSID.Num. of SSIDs
[PROV] Set UserAuth
This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set UserAuth,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
130 Audit log examples

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English