HP StorageWorks P9000 - Disk Arrays Reference Guide

[PROV] Edit Cmd Dev(DevGrp)
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit DevGrpDef,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,DevGrpDef}
=[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=2
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume where the device groups setting is
changed.
LDKC:CU:LDEV
Indicates whether the device groups setting is enabled or disabled.
Disable or Enable will appear.
DevGrpDef
The number of logical volumes where the device groups setting is changed.Num. of LDEVs
[PROV] Edit Cmd Dev(Sec)
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit CommandDevSec,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,CommandDevSec}=
[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=2
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume where the command device security
setting is changed.
LDKC:CU:LDEV
Indicates whether the command device security setting is enabled or disabled. Disable or Enable
will appear.
CommandDevSec
The number of logical volumes that the command device security setting is changed.Num. of LDEVs
[PROV] Edit Command Devices
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Command Devices,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,CommandDev}=[{0xXX:0xXX:0xXX,Disable},
{0xXX:0xXX:0xXX,Enable}],Num. of LDEVs=2
Provisioning Descriptions 109

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English