HP StorageWorks P9000 - Disk Arrays - [Maintenance] Format Stop; [Maintenance] MP Restore

Basic Information
The parameter Progress Error is output when a failure is detected while displaying the progress of
the Format process.
Detailed Information
DescriptionItem
The parity group number.PG
The number of parity groups.Num. of PGs
The LDEV number.LDEV
The number of LDEVs.Num. of LDEVs
[Maintenance] Format Stop
This log information is output when the format process is suspended.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Maintenance],Format Stop,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PG=[1-1],Num. of PGs=1
+PG=[E1-1],Num. of PGs=1 ->in case of an external volume
+PG=[V1-1],Num. of PGs=1 ->in case of a virtual volume
+PG=[X1-1],
Num. of PGs=1 ->in case of a Thin Provisioning volume
+LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1
Detailed Information
DescriptionItem
The parity group number.PG
The number of parity groups.Num. of PGs
The LDEV number.LDEV
The number of LDEVs.Num. of LDEVs
[Maintenance] MP Restore
Example
07xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,SVP,uid=maintenance,0,,
[Maintenance],MP Restore,,Error,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+MP=[MP08-2MC],Num. of MPs=1
Detailed Information
DescriptionItem
The MP.MP
The number of MPs.Num. of MPs
86 Audit log examples