+{Port,Speed(Gbps)}=[{XX,1},{XX,2},{XX,Auto},{XX,4}],
Num. of Ports=4
Detailed Information
DescriptionItem
The name of the port that the channel speed is set.Port
The channel speed set.
1: 1 Gbps, 2: 2 Gbps, 4: 4 Gbps, 8: 8 Gbps, Auto: Auto mode.
Speed(Gbps)
The number of ports where the channel speed is set.Num. of Ports
[PROV] Edit Ports(Topology)
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Ports(Topology),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fabric,Connection}=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},
{XX,Enable,P-to-P},{XX,Disable,P-to-P}],Num. of Ports=4
Detailed Information
DescriptionItem
The name of the port where the topology of Fibre Channel is changed.Port
Indicates whether the Fabric switch is enabled or disabled.
Disable or Enable is output.
Fabric
The connecting mode of the Fabric switch selected.
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
Connection
The number of ports where the topology of Fibre Channel is changed.Num. of Ports
[PROV] Edit/Delete Pools
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit/Delete Pools,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Command,Pool ID,Pool Type,Threshold(%),Subscription Limit(%),
Result}
=[{Change,1,Snapshot,20,100,Normal end},
{Change,2,Snapshot,20,110,Normal end},
{Change,3,Snapshot,20,120,Normal end}],Num. of Pools = 3
Provisioning Descriptions 117
To Next Page
Loading...
Need help?
General