Detailed Information
DescriptionItem
The operation on the pool.
Change: Changing pool information about the threshold and the subscription limit
Change Tier: Changing imformation about Smart Tiers
Delete: Delete pool
Command
The pool ID of the pool where the settings have been changed or the number of the pool that
have been deleted.
Pool ID
The pool type.
Snapshot or Thin Provisioning
Pool Type
Indicates whether the multi-tier mode of the pool is enabled or disabled.
Enable: Enabled, Disable: Disabled
This item is output only when “Command” is “Change Tier”.
Multi Tier Pool
The warning threshold of the usage rate of the pool in percent (%).
This item is output only when “Command” is “Change”.
Threshold(%)
The depletion threshold of the usage rate of the pool in percent (%).
The item does not output in the case of not specifying the depletion threshold. This item is output
only when "Command" is "Change".
Depletion
Threshold(%)
The subscription limit for the pool in percent (%).
This item is output only when “Command” is “Change”.
Subscription Limit(%)
The auto coutrol mode of the created or expanded pool.
Auto: Auto, Manual: Manual
This item is output only when “Command” is “Change Tier”.
Tier Management
The cycle of performance monitoring for the pool.
1: every one hour, 2: every two hours, 4: every four hours, 8: every eight hours, 24: every
twenty-four hours
This item is output only when “Command” is “Change Tier”.
Cycle Time
The monitoring period of the pool.
Format: “H1:M1-H2:M2”
H1: The time when the monitoring starts (hour)
M1: The time when the monitoring starts (minute)
H2: The time when the monitoring ends (hour)
M2: The time when the monitoring ends (minute)
This item is output only when “Command” is “Change Tier”.
Monitoring Period
The result of the operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end, Not Execute: Not Executed
xxxx:Part code, yyyyy: Error code
Result
The number of the pool where the settings have been changed or the number of the pool that
have been deleted.
Num. of Pools
118 Audit log examples