{4A,50560E8000C3E214,0x0002,Normal end}],Num. of Paths=4
+Num. of Volumes=2
Detailed Information
DescriptionItem
The number of the external volume group and the reference number assigned to the external
volume of the external volume that the mapping path configuration has been changed. The
number on the left of a dash (-) is the external volume number and the number on the right of
the dash (-) is the reference number of the group.
ExGroup
The path group number of the external volume that the mapping path configuration has been
changed.
PathGroup
The result of the operation.Normal end: Normal end, Error(xxxx-yyyyy): Abnormal endxxxx:
Part code, yyyyy: Error code
Result
The port name of the external port of the local storage system.Port
The WWN of the Target port of the external storage system.WWN
The LUN of the external volume.LUN
The result of editing the path.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
PathResult
The number of mapping path (Port-WWN-LUN) set.Num. of Paths
The number of external volumes that the mapping path configuration has been changed.Num. of Volumes
[Ext Stor] Edit ES VOLs
Example 1: Change the cache mode
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Ext Stor],Edit ES VOLs,CacheMode,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Group,Result}
=[{E1-1,Enable,Normal end},{E1-2,Enable,Normal end},
{E1-3,Enable,Normal end},{E1-4,Enable,Normal end}],
Num. of Groups=4
Example 2: Set the cache inflow control
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Ext Stor],Edit ES VOLs, InflowControl,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Group,Mode,Result}=[{E1-1,Enable,Normal end},
{E1-2,Enable,Normal end},{E1-3, Enable,Normal end},
{E1-4, Enable,Normal end}],Num. of Groups=4
Basic Information
DescriptionParameter
The cache mode is changed.Cachemode
The cache inflow control is set.InflowControl
178 Audit log examples
To Next Page
Loading...
