DescriptionItem
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of mapping paths that path status has been checked.Num. of Paths
[Ext Stor] Reconnect ES VOLs
If this operation is performed from Remote Web Console, this logged information indicates that
this operation was only requested but not finished. However, if this operation is performed from
CLI (or if this logged information appears between the CflSet Start operation and the CflSet End
operation), this logged information indicates that the operation was finished.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Ext Stor],Reconnect ES VOLs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Group,Result}
=[{E1-1,Normal end},{E1-2,Normal end},
{E1-3,Normal end},{E1-4,Normal end}],Num. of Groups=4
Detailed Information
DescriptionItem
The group number of the external volume resumed.Group
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of external volumes resumed.Num. of Groups
[Ext Stor] Split ES Path Grp
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Ext Stor],Split ES Path Grp,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{PathGroup,NewPathGroup,ExGroup,Result}
=[{1,11,E1-11,Normal end},{1,12,E1-21,Normal end},
{2,21,E2-11,Normal end}],Num. of Volumes=3
Detailed Information
DescriptionItem
The path group ID of the original path group.PathGroup
The path group ID of a newly created path group.NewPathGroup
The external volume group number of the external volumes moved to the new path group, and
the sequential number of the external volume. The format is “external volume group
number-sequential number of the group”.
ExGroup
External Storage Descriptions 181
To Next Page
Loading...
Need help?
General