Table 50 Audit Log Transfer Window (continued)
DescriptionItem
Set the folder location to save the audit log file. The folder location should be relative to a home
directory of a FTP server user. The default setting and the restriction for the available values are
the same as those of Primary Server Output Folder.
Secondary Server
Output Folder
When you click Transfer, the audit log file is transferred to the secondary FTP server according
to the settings selected on the audit log Transfer window. You can transfer the current audit log
file without waiting for the audit log file to reach the threshold size for automatic transfer.
Transfer to
Secondary Server
The Request button allows you to complete (resolve) the SIM that occurs when transfer of audit
logs to any FTP servers fails. Resolve the error condition, manually transfer the audit log file by
clicking Transfer, and then complete the SIM. The SIM status will change to Complete. Important:
If you do not complete the SIM, the SIM will not occur the next time an FTP transfer fails.
SIM Complete
Implements all the settings. This button is available only in Modify mode.Apply
Cancels all the settings. This button is available only in Modify mode.Cancel
Audit Log Setting window
Use the Audit Log Setting window to configure the audit log setting.
Table 51 Audit Log Setting window
DescriptionItem
Specify whether to temporarily store the audit log on a system disk so the information will not
be lost.
• Enable: Temporarily stores the audit log on a system disk. If you need to keep track of
commands sent from the host, Enable is recommended. If you select Enable, make sure that
a system disk is already created by a storage administrator. For how to create a system disk,
see the HP StorageWorks P9000 Provisioning for Open Systems User Guide.
• Disable: Does not store the log on a system disk.
Audit Log buffer
Implements the setting. This button is available only in Modify mode.Apply
Cancels the setting. This button is available only in Modify mode.Cancel
218 Audit log GUI reference
To Next Page
Loading...
Need help?
General