HP StorageWorks P9000 - Disk Arrays - [Cnt Ac-S Z] Clear SIM; [Cnt Ac-S Z] Delete CMD.dev; [Cnt Ac-S Z] Delete Pair

DescriptionItem
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of changed pairs.Num. of Pairs
[Cnt Ac-S Z] Clear SIM
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Clear SIM,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
[Cnt Ac-S Z] Delete Cmd.Dev
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Delete Cmd.Dev,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
[Cnt Ac-S Z] Delete Pair
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Delete Pair,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{VOL(LDKC:CU:LDEV),PairVOL(LDEV),Type,Mode,Result}
=[{0x00:0x00:0x00,0xFD,M-VOL,Normal,Normal end},
{0x00:0x00:0x01,0xFE,M-VOL,Normal,Normal end},
{0x00:0x00:0x02,0xFF,M-VOL,Normal,Normal end},(snip)
-(snip)],Num. of Pairs=xx
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the volume on the primary site in the deleted pair.VOL(LDKC:CU:LDEV)
The LDEV number of the paired volume in the deleted pair.PairVOL(LDEV)
The volume type of the connected volume.
M-VOL: Main volume, R-VOL: Remote volume
Type
The delete mode.
Force: Forced deletion, Normal: Normal deletion, All: delete all
Mode
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of deleted pairs.Num. of Pairs
Continuous Access Synchronous Z Descriptions 155