HP StorageWorks P9000 - Disk Arrays - Business Copy Descriptions; [BC;SS] Change Reserve; [BC;SS] Initialize; [BC;SS] Option

Business Copy Descriptions
[BC/SS] Change Reserve
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[BC/SS],Change Reserve,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Attribute=Set
++{VOL(LDKC:CU:LDEV),Result}
=[{0xZZ:0xXX:0xYY,Normal end},
{0xZZ:0xXX:0xYY, Error(xxxx-yyyy)}],Num. of Vols=2
Detailed Information
DescriptionItem
Indicates whether the reserve attribute is set or cancelled.
Set: Reserve attribute is set, Reset: Reserve attribute is cancelled.
Attribute
The LDKC, CU, and LDEV numbers of the volume where the reserve attribute is set or
cancelled.
VOL(LDKC:CU:LDEV)
The result of operation.
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of volumes where the reserve attribute is set or cancelled.Num. of Vols
[BC/SS] Initialize
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[BC/SS],Initialize,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
[BC/SS] Option
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[BC/SS],Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Swap & Freeze=Enable,HOST I/O Performance
=Enable,Reserve03=Enable,(snip),Reserve32=Disable
Detailed Information
DescriptionItem
Indicates whether the Swap & Freeze option is enabled or disabled.
Enable: Option is enabled, Disable: Option is disabled.
Swap & Freeze
Indicates whether the host I/O option is enabled or disabled.
Enable: Option is enabled, Disable: Option is disabled.
HOST I/O
Performance
Reserved items. X is the number from 03 to 32.Reserve X
138 Audit log examples