HP StorageWorks P9000 - Disk Arrays - [BC Z] Change Reserve; [Bc Z] Ctg

Detailed Information
DescriptionItem
The set copy speed.
Faster: High speed, Medium: Medium speed, Slower: Low speed
Copy Pace
The LDKC, CU, and LDEV numbers of the source volume in the created pair.S-VOL(LDKC:CU:LDEV)
The LDKC, CU, and LDEV numbers of the target volume in the created pair.T-VOL(LDKC:CU:LDEV)
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of created pairs.Num. of Pairs
[BC Z] Change Reserve
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[BC Z],Change Reserve,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Attribute=Set
++{VOL(LDKC:CU:LDEV),Result}=[{0xZZ:0xXX:0xYY,Normal end},
{0xZZ:0xXX:0xYY, Error(xxxx-yyyy)}],Num. of Vols=2
Detailed Information
DescriptionItem
Indicates whether the reserve attribute is set or cancelled.
Set: the reserve attribute is set, Reset: the reserve attribute is cancelled.
Attribute
The LDKC, CU, and LDEV numbers of the volume that the reserve attribute is set or cancelled.VOL(LDKC:CU:LDEV)
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of volumes that the reserve attribute is set or cancelled.Num. of Vols
[BC Z] CTG
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[BC Z],CTG,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{CTG,Command,Result}
=[{0x00,Add,Normal end},{0x01,Delete,Error(xxxx,yyyy)}],
Num. of CTGs=2
142 Audit log examples